|
|
Post by mrgreg on May 12, 2007 1:01:29 GMT -5
If you've had success or trouble using our universal remote with the LMC-1, post it here.
I had no problem configuring my Logitech Harmony 670. The only quirks were that it is listed as a "Receiver" even though it is clearly not. Also, it didn't know the 0-9 codes, so I had to teach it those.
If anybody knows how I can add these buttons to the Logitech profile, I'd be happy to.
Anybody using another remote?
|
|
|
|
Post by The Administrator on May 12, 2007 10:19:43 GMT -5
Welcome, and thanks for the post, MrGreg!
It's no surprise, but I had no problems at all setting up my Harmony 550. I was pleasantly surprised that Logitech's software/site had Emotiva listed and seeming had no trouble setting up the LMC-1.
|
|
|
|
Post by rmassey on May 12, 2007 22:55:05 GMT -5
if anyone finds discrete on/off for the LMC-1, please post it here. I've tried to locate the codes via JP1 and could not find the discrete codes
|
|
gonk
Audiophile
Technical Host
Posts: 30
|
Post by gonk on May 14, 2007 6:52:19 GMT -5
My understanding from following the beta testing discussion was that no discrete codes exist.
|
|
|
|
Post by rmassey on May 14, 2007 10:23:45 GMT -5
Yes, that was my understanding as well (no discretes), having gone thru the exhaustive JP1 search. I just thought I'd ask one more time, in case I was mistaken.
|
|
|
|
Post by rmassey on May 22, 2007 15:57:42 GMT -5
Can we post images here yet? I have a nifty JP1/OBC chart for the EMO remote.
|
|
|
|
Post by The Administrator on May 22, 2007 16:20:18 GMT -5
Ah, no. For the moment, you're going to have to host the images somewhere else and then link to them from here. Sorry.  It costs $2/month for 20mb of attachments. A trivial amount, perhaps, but I haven't ponied up for it. Can we post images here yet? I have a nifty JP1/OBC chart for the EMO remote. |
|
|
|
Post by rmassey on May 22, 2007 22:08:33 GMT -5
np, I'll push it up to photobucket and post a link.
|
|
|
|
Post by electroman on May 23, 2007 14:56:41 GMT -5
I had no real problems with the Harmony 880. I also found that I could put a startup delay in the settings for the LMC-1 and that helped out my wife quite a bit.
|
|
|
|
Post by mrgreg on May 23, 2007 17:06:29 GMT -5
What do you mean by a startup delay? Is this to delay the selection of inputs until after the volume ramp up is completed?
|
|
|
|
Post by rmassey on May 24, 2007 11:31:30 GMT -5
|
|
|
|
Post by electroman on May 25, 2007 10:55:43 GMT -5
What do you mean by a startup delay? Is this to delay the selection of inputs until after the volume ramp up is completed? I posted about it here: av123forum.com/showthread.php?p=351048#post351048All devices have a preset delay - it allows the remote to wait on sending commands to the device until it is fully started (ie. finished the volume ramp-up) |
|
